Fundamentals Of Modern Manufacturing (materials, Processes And Systems, International Adaptation)

By (author) Mikell P. Groover; By (author) Groover Mikell P.
Description:
Fundamentals of Modern Manufacturing: Materials, Processes, and Systems is designed for a first course or two-course sequence in manufacturing at the junior or senior level in mechanical, industrial, and manufacturing engineering curricula. The distinctive and “modern” approach of the book emerges from its balanced coverage of the basic engineering materials, the inclusion of recent manufacturing processes and comprehensive coverage of electronics manufacturing technologies. The quantitative focus of the text is displayed in its emphasis on manufacturing science, greater use of mathematical models and end-of-chapter problems. This International Adaptation of the book offers revised and expanded coverage of topics and new sections on contemporary materials and processes. The new and updated examples and practice problems helps students gain solid foundational knowledge and the edition has been completely updated to use SI units. 
Table of contents:

1 INTRODUCTION AND OVERVIEW OF MANUFACTURING

1.1 What Is Manufacturing?

1.2 Materials in Manufacturing

1.3 Manufacturing Processes

1.4 Production Systems

1.5 Manufacturing Economics

Part I Engineering Materials and Product Attributes

2 THE NATURE OF MATERIALS

2.1 Atomic Structure and the Elements

2.2 Bonding between Atoms and Molecules

2.3 Crystalline Structures

2.4 Noncrystalline (Amorphous) Structures

2.5 Engineering Materials

3 MECHANICAL PROPERTIES OF MATERIALS

3.1 Stress-Strain Relationships

3.2 Hardness

3.3 Effect of Temperature on Properties

3.4 Fluid Properties

3.5 Viscoelastic Behavior of Polymers

4 PHYSICAL PROPERTIES OF MATERIALS

4.1 Volumetric and Melting Properties

4.2 Thermal Properties

4.3 Mass Diffusion

4.4 Electrical Properties

4.5 Electrochemical Processes

5 ENGINEERING MATERIALS

5. 1 Metals and Their Alloys

5.2 Ceramics

5.3 Polymers

5.4 Composite Materials

6 DIMENSIONS, SURFACES, AND THEIR MEASUREMENT

6.1 Dimensions, Tolerances, and Related Attributes

6.2 Conventional Measuring Instruments and Gages

6.3 Surfaces

6.4 Measurement of Surfaces

6.5 Effect of Manufacturing Processes

Part II Solidification Processes

7 FUNDAMENTALS OF METAL CASTING

7.1 Overview of Casting Technology

7.2 Heating and Pouring

7.3 Solidification and Cooling

8 METAL CASTING PROCESSES

8.1 Sand Casting

8.2 Other Expendable-Mold Casting Processes

8.3 Permanent-Mold Casting Processes

8.4 Foundry Practice

8.5 Casting Quality

8.6 Castability and Casting Economics

8.7 Product Design Considerations

9 GLASSWORKING

9.1 Raw Materials Preparation and Melting

9.2 Shaping Processes in Glassworking

9.3 Heat Treatment and Finishing

9.4 Product Design Considerations

10 SHAPING PROCESSES FOR PLASTICS

10.1 Properties of Polymer Melts

10.2 Extrusion

10.3 Production of Sheet and Film

10.4 Fiber and Filament Production (Spinning)

10.5 Coating Processes

10.6 Injection Molding

10.7 Compression and Transfer Molding

10.8 Blow Molding and Rotational Molding

10.9 Thermoforming

10.10 Casting

10.11 Polymer Foam Processing and Forming

10.12 Product Design Considerations

11 PROCESSING OF POLYMER MATRIX COMPOSITES AND RUBBER

11.1 Overview of PMC Processing

11.2 Open-Mold Processes

11.3 Closed-Mold Processes

11.4 Other PMC Shaping Processes

11.5 Rubber Processing and Shaping

11.6 Manufacture of Tires and Other Rubber Products